Wax Coat Spray

Wax Coat Spray

news

Part No. #A9101

Clear Synthetic wax and a corrosion additive base semi-flowable protection coating. Flows into & protects inner most cavies. Provides superior protection. Neutralizes surface moisture.

Our Products

Specification

Application Areas:

Safe and effective protection coating for various kinds of metal moulds, moving parts of the machines, links, chains, gears, bearings etc. Ideal stand by and storage protection for spare parts with possibility of direction installation. Easily removable coating.

Precautions:

Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50℃. Use in well ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause busting of the can. Keep out of reach of children.

Storage & Shelf Life:

The product may be stored at normal ambient temperature and has a shelf life of not less 2 years with correct storage. Aerosol should always be stored below 50℃, away from direct heat and naked flame.

Technical Service:

AARNA LUBE PVT LTD. provides technical support under the program of research and development. For any enquiry contact us at details provided below.

Packing:

300gm/500 ml, Aerosol Cans.

Technical Data

Standard Conditions Unit Value
Solid Lubricants
Type Synthetic wax
Solvents
Type Special boiling point gasoline
Additives
Type Corrosion protection
Film Layer
Optimum Layer Thickness μm 35-40 microns
Application Temperature °C Room temperature
Drying Time at 20°C h 0.1
Application-Specific Data
Density °+20°C g/ml 0.7 – 0.78
Colour Translucent
Film type Waxy, Dry
Operating Temperatures
Lower operating temperature °C - 30
Upper operating temperature °C +65

Disclaimer

Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.