FG Silicone Spray

FG Silicone Spray

news

Part No. A-9113

The FG Silicone Spray is stable to heat and high temperature resistant silicone oil. The spray meet the requirements with possible accidental contact with food products.

Technical Data

Low evaporation

High thermal stability

Antifoaming properties Characteristic

Excellent chemical stability

High resistance against oxidation

Low variation of viscosity with temperature

Best resistance against extreme temperatures

Our Products

Specification

Application Areas:

General lubrication with synthetic oils of all type of mechanisms, working at high temperatures under water influence and other contaminating products. Lubrication of mechanisms with incidental food contact, Transport belts, Guides, Machines food industry in general, Demolding of plastic operations.

Instruction:

Shake very well before use. Keep the can vertically for use and storage. Spray over the surface from 30 cm distance. For best performance wait some minutes to facilitate penetration and actuation of the lubricant.

Storage & Shelf Life:

Store in cool dry place away from direct sunlight. Minimum shelf life is 24 months from the date of manufacturing.

Warranty:

Each unit is unconditionally warranted against any defect for a minimum period of 12 months from the date of supply.

Caution:

Do not spray into or around open flame & spark. Spray in ventilated area. Exposure to heat or sunlight. Where temperature exceed 120 F. May cause bursting. Do not puncture on incinerate can. Store can in cool, dry place for optimum shelf life.

Packing:

300pm/500 ml Aerosol Cans

Disclaimer

Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.