Red Insulating Varnish

Red Insulating Varnish

news

Part No. #A9117

Tough, flexible, air dry insulation and protection coating. Thoroughly penetrates into over hang winding portion & coils, seals out dust and moisture. Designed to be used as a finishing coat over existing impregnating varnishes to provide class H insulation

Our Products

Specification

Application Areas:

Flexible, conformal finishing, insulation & protection on windings & coils. Providing Insulation for Thermostats, High-voltage circuits, commutator ends, Bus-bars, joints & connections etc.

Precautions:

Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50℃. Use in well ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause busting of the can. Keep out of reach of children.

Storage & Shelf Life:

The product may be stored at normal ambient temperature and has a shelf life of not less 2 years with correct storage. Aerosol should always be stored below 50℃, away from direct heat and naked flame

Technical Service:

AARNA LUBE PVT LTD. provides technical support under the program of research and development. For any enquiry contact us at details provided below.

Packing:

300gm/500 ml, Aerosol Cans.

Chemical and Physical Properties

Flash Point 50℃
Appearance Red
Solubility In H2o Insoluble
Vapour Density In Air >1
Dry Time 10-15 Minutes
Dielectric Strength >2200 V/ml
Vapour Pressure 48-55 Psi@ 35℃
Odour Hydrocarbon
Stability Stable
Boiling Point ℃ 105-305(Concentrate)
Specific Gravity 0.85
Full Cure 12-24 Hrs
Mandrel 1/2 In. No Cracking
Ph Value N/A

Disclaimer

Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.