Moly Spray
Part No. #A9112
AARNA Moly Spray is a dry lubricant of molybdenum disulphide, appropriate for temperature up to 450℃. AARNA Moly Spray built a long life homogeneous, adherent heavy load and temperature change resistant lubricant film, thus assuring smooth sliding and reducing the friction coeffcient.
Technical Data
Appearance: Solid (Greyish Black)
Relative Density: 1000 g/cc
Odour: Characteristic
Drying Time: 10 Minute at +25℃
Our Products
Specification
Application Areas:
Spray at a distance of 10-12" from the surface for uniform layer. Shake well before use till ball moves smoothly. Aer each use, turn the can upside down & spray till only the propellant gas comes out.
Precautions:
Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50℃. Use in well ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause busting of the can. Keep out of reach of children
Storage & Shelf Life:
The product may be stored at normal ambient temperature and has a shelf life of not less 2 years with correct storage. Aerosol should always be stored below 50℃, away from direct heat and naked flame.
Technical Service:
AARNA LUBE PVT LTD. provides technical support under the program of research and development. For any enquiry contact us at details provided below.
Packing:
300gm/500 ml, Aerosol Cans.
Disclaimer
Information in this literature is true and accurate to the best of our knowledge. However, since conditions under which products may be used are beyond our control, recommendations are made without warranty or guarantee.
Enquire Now