Part No .#A9123

AARNA Hot Mould Spray is a solvent dispersion, semi-permanent release coating designed to provide maximum release cycles per application with no transfer. A coating of AARNA Hot Mould Spray will provide a durable, dry, bonded, colourless film that has excellent high temperature stability, mould flow and

Application Areas:

For all types of rubber and plastic mouldings. It is particularly effective for injection or compression moulding of rubber goods, rotational moulding of thermoplastics & compression or vacuum bag moulding of thermoset resins. Composite/Plastics like phenolic, epoxy, graphite, nylon, ABS etc, Polyurethanes like rigid and flexible & Processes such as potting, laminating, encapsulating.

Precautions:

Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50°C. Use in well ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120°C, may cause busting of the can. Keep out of reach of children.

Storage & Shelf Life:

The product may be stored at normal ambient temperature and has a shelf life of not less 2 ears with correct storage. Aerosol should always be stored below 50°C, away from direct heat and naked flame.

Technical Service:

AARNA LUBE PVT LTD. provides technical support under the program of research and evelopment. For any enquiry contact us at details provided below.

Packing:

500 ml, Aerosol Cans.