Tough, ﬂexible, air dry insulation and protection coating. Thoroughly penetrates into over hang winding portion & coils, seals out dust and moisture. Designed to be used as a ﬁnishing coat over existing impregnating varnishes to provide class H insulation.
Application Areas :
Flexible, conformal ﬁnishing, insulation & protection on windings & coils. Providing Insulation for Thermostats, High-voltage circuits, commutator ends, Bus-bars, joints & connections etc.
Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50℃. Use in well ventilated areas. Do not spray into or around open ﬂames and sparks. Exposure to heat, which exceeds 120℃, may cause busting of the can. Keep out of reach of children.
Storage & Shelf Life :
The product may be stored at normal ambient temperature and has a shelf life of not less 2 years with correct storage. Aerosol should always be stored below 50℃, away from direct heat and naked ﬂame.
Technical Service :
AARNA LUBE PVT LTD. provides technical support under the program of research and development. For any enquiry contact us at details provided below.
300gm/500 ml, Aerosol Cans.
|Chemical and Physical Properties|
|Solubility In H2o||Insoluble|
|Vapour Density In Air||>1|
|Dry Time||10-15 Minutes|
|Dielectric Strength||>2200 V/ml|
|Vapour Pressure||48-55 Psi@ 35℃|
|Boiling Point ℃||105-305(Concentrate)|
|Full Cure||12-24 Hrs|
|Mandrel 1/2 In.||No Cracking|
Disclaimer: Information in this literature is to the best of our knowledge, true and accurate. However, since condions under products may be used are beyond our control, recommendation are made without warranty or guarantee.
|Drop us an email or call to get more information. Get A Quote »|
Aarna Lube Private Limited is leading suppliers of Specialty Lubricants and Automatic lubricator. These are known for reducing wear and tear, alleviating friction and enhancing the functioning of machine's components.
All Rights Reserved By Aarna Lube Pvt. Ltd.
Designed By Mirackle Solutions