Mould Release (Silicon Free)


Part No. #A9110

Description :
Non Silicon Paintable Heavy duty mould Release agent.

Application Areas :
For all types of rubber and plastic mouldings. It is particularly effective for injection or compression moulding of plastic, rotational moulding of thermoplastic & compression or vacuum bag moulding of thermoset resins.

Precautions :
Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50℃. Use in well ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause busting of the can. Keep out of reach of children.

Storage & Shelf Life :
The product may be stored at normal ambient temperature and has a shelf life of not less 2 years with correct storage. Aerosol should always be stored below 50℃, away from direct heat and naked flame.

Technical Service :
AARNA LUBE PVT LTD. provides technical support under the program of research and development. For any enquiry contact us at details provided below.

Packing :
300gm/500 ml, Aerosol Cans.

Mould Release (Silicon Free)
Technical Data
Appearance Colourless
Solubility In H2O Insoluble
Odour Odourless
Relative Density 0.78

Disclaimer: Information in this literature is to the best of our knowledge, true and accurate. However, since condions under products may be used are beyond our control, recommendation are made without warranty or guarantee.

Drop us an email or call to get more information. Get A Quote



Aarna Lube Private Limited is leading suppliers of Specialty Lubricants and Automatic lubricator. These are known for reducing wear and tear, alleviating friction and enhancing the functioning of machine's components.

Contact Us

105 Richa Trade Centre, Opp Nexa Show Room,
Above Suman Steel, Sativali- Vasai East
Pincode- 401208.



All Rights Reserved By Aarna Lube Pvt. Ltd.

Designed By Mirackle Solutions