Corrosion Inhibitor Spray


Part No. #A9107

Description :
Synthetic oil & additive based semi-flowable coating. Flows into & protects inner most cavies. Provides high performance protection. Neutralize surface moisture.    

Application Areas :
For protection of semi-finished and finished machines and components, tools, spares, bearings, shafts, moving parts, spindles, piston rods, wire cables and drag cables, etc. during storage and transport, even in extreme weather like coastal and marine atmospheres. Protects plastic injection moulds used to manufacture precision electronic components. For preservation under high corrosive loading, e.g. industrial atmospheres, outdoor weathering under roofs of semi-finished products, finished products, parked vehicles, agricultural and construction machines, in building constructions and civil engineering etc.

Precautions :
Can is under high pressure. Do not puncture or incinerate it even when apparently empty. Store below 50℃. Use in well ventilated areas. Do not spray into or around open flames and sparks. Exposure to heat, which exceeds 120℃, may cause busting of the can. Keep out of reach of children.

Storage & Shelf Life :
The product may be stored at normal ambient temperature and has a shelf life of not less 2 years with correct storage. Aerosol should always be stored below 50℃, away from direct heat and naked flame.

Technical Service :
AARNA LUBE PVT LTD. provides technical support under the program of research and development. For any enquiry contact us at details provided below.

Packing :
300gm/500 ml, Aerosol Cans.

Corrosion Inhibitor Spray
Technical Data
Conditions Unit Value
Base Oil
Type Mineral
Additives
Type

 

VCI – Corrosion protection
Application-Specific Data
Density +20°C g/ml 0.820
Colour Clear/Green
Film Type Oily
Film Thickness 25 - 55 microns
Corrosion Protection Upto 12 months
Operating Temperatures
Lower Operating Temperature °C - 37
Upper Operating Temperature °C

+ 75

Corrosion Protection Test
Advantages and Benefits
  1. Eco-friendly 
  2. Free from chlorinated solvents
  3. Corrosion Protection up to 12 months
  4. Provides lubrication, protects the  is resistant to UV rays
  5. Free from nitrites, phosphates, chromates & other heavy metals
  6. Highly effective due to multifunctional VCI corrosion inhibitors

Disclaimer: Information in this literature is to the best of our knowledge, true and accurate. However, since condions under products may be used are beyond our control, recommendation are made without warranty or guarantee.

Drop us an email or call to get more information. Get A Quote



Aarna Lube Private Limited is leading suppliers of Specialty Lubricants and Automatic lubricator. These are known for reducing wear and tear, alleviating friction and enhancing the functioning of machine's components.

Contact Us

105 Richa Trade Centre, Opp Nexa Show Room,
Above Suman Steel, Sativali- Vasai East
Pincode- 401208.



All Rights Reserved By Aarna Lube Pvt. Ltd.

Designed By Mirackle Solutions