Part No. #A9119

Description :
It is an insulator and white colored dry film designed for dry film lubrication on surfaces submitted to frictional contact at high temperature (>1200℃), contact with material in fusion, wear by fretting corrosion, etc.

Application Areas :
Boron Nitride aerosol may be used as a coating for: High temperature release (crucibles, molds, transition plates), High temperature lubrication, Corrosion resistance to molten metals, molten glasses and slags, Anti-oxidation barriers, anti-oxidation barriers during hot pressing operations.

Instructions :
Shake very well before use. Keep the can vertically for use and storage. Spray over the surface from 30 cm distance. For best performance wait some minutes to facilitate penetration and actuation of the lubricant.

Storage & Shelf Life :
Store in cool dry place away from direct sunlight. Minimum shelf life is 12 months from the date of manufacturing.

Warranty :
Each unit is unconditionally warranted against any defect for a minimum period of 12 months from the date of supply.

Caution :
Do not spray into or around open flame & spark. Spray in ventilated area. Exposure to heat or sunlight. Where temperature exceed 120 F. May cause bursting. Do not puncture on incinerate can. Store can in cool, dry place for optimum shelf life.

Packing :
300gm/500 ml, Aerosol Cans.